If your roofer cannot start because solar panels are on the roof, SunUnplug can help. We remove your panels, store them safely, coordinate with your roofer, then reinstall and reconnect your system when the new roof is ready.
We work with major solar equipment brands and systems installed by other companies
You are not alone. Many Florida homeowners get stuck when they need a new roof but have solar panels installed. Roofers usually will not replace the roof with panels in the way, and some solar installers are slow, unavailable, out of business, or too expensive for a detach-and-reset project.
SunUnplug solves that gap. One team handles the solar panel removal, safe storage, roofer coordination, reinstall, reconnection, and production check, even if we did not install your original system.
From the first call to your solar system producing again, we help keep the roofing and solar work moving together.
First we test the system, so any existing issue gets flagged before we touch anything. Then we shut down safely and remove the panels, rails, and wiring.
Your roofer gets a clean, panel-free roof. Most re-roofs wrap up in 2–3 days. We time the removal so your system is offline for as little as possible.
Once your new roof is ready, we reinstall the panels, reconnect the system, inspect the components, and verify that your solar production is back online.
Every project starts and ends with a full system test. So you know your panels worked the day we arrived, and work the day we leave.
More than a detach and reinstall. A full system reset, tested before and after. One clear quote, no confusion between your roofer and your solar contractor.
Before we start the detach, we run a full production test on the array and inverter. If there's an existing issue, you'll know now, not after the reinstall. Panel count, roof timeline, and access are confirmed during the quote.
Panels, rails, flashing, and attachments removed carefully. Each panel labeled and the exact wiring layout documented. So the reinstall puts everything back in the original configuration.
Panels stored where you want. Garage, patio, side of the house. They're already weather-rated, but we label, stack on pallets, and bag the wiring and microinverters for a clean reinstall.
We stay in sync with your roofer so the panels come off before roofing starts and go back on after the new roof is ready.
All-new mounting bases, screws, and flashings. The old hardware loses its waterproof seal when removed. Wiring reconnected per the original layout. Inverter checked and system brought back online.
Same production test before removal and after reinstall, confirming every panel and the inverter match the pre-removal baseline. You get the readings for your records.
We stand behind the reinstall work and document what was completed.
One project contact keeps you updated by phone or text so you know what is happening and when.
“My roofer could not start until the panels were removed. SunUnplug coordinated everything and made the process much easier than calling multiple companies.”
“The best part was not having to be the middleman between the roofer and the solar company. They kept the schedule moving and got the system back online.”
“My original installer was not available. SunUnplug reviewed the system, removed the panels, and reinstalled them after the new roof was finished.”
If your question is not here, send us a message and we will follow up to review your project.
Tell us about your solar system and roof timeline. We will review your project and send a clear quote with no pressure and no obligation.
Takes less than one minute. We will follow up to review your project.
We will be in touch soon to review your project.